Gate Operators, Parts and Accessories for AGS LiftMaster and Elite gate operators Automatic Gate Openers, Parts and Accessories for:
Chamberlain Professional Products, LiftMaster, Elite,
and AGS Automatic Gate Supply

Operator Depot (Formerly AGS)
25583 Avenue Stanford, Valencia, CA 91355
(800) 365-1047 (661) 294-1407 FAX (661) 294-1401

Miscellaneous Control Accessories      Accessory Controls Index  

.
Home

Sliding
Gate
Openers
Residential

Sliding
Gate
Openers
Commercial

Swinging
Gate
Openers
Residential

Swinging
Gate
Openers
Commercial

Automatic
Gate
Hardware

Accessory
Controls

Telephone
Entry Systems

Parts
Department

Installation
Information

Contact
Information

 .
Miscellaneous Control Accessories for Automatic Gates
  MODEL DESCRIPTION YOUR COST
Electric gate lock GC 824 GC 824

Heavy-Duty electric gate lock
Heavy all-steel construction. Fail-secure operation keeps gate locked if power is lost. Can be welded onto gate and post. 115V operation, solenoid-activated release. Can be released in case of emergency.

 $ 395.00 
Electric gate lock GC 824-12 GC 824-12 Medium-Duty electric gate lock
All-steel construction. Solenoid-activated release. Powdercoated finish. 12VAC/DC operation. Low current, 100mA. Fail-secure operation keeps gate locked if power is lost. Can be released in case of emergency.		 $ 338.00
Magnetic gate lock GC 838 GC 838 Magnetic gate lock
Incredible 1,200 lb. holding force. Operates on 12 or 24VDC. Low power consumption, 110mA @ 12VDC and 220mA @ 24VDC. Universal mounting holes provided for ease of installation. Conduit can be run into any one of 4 threaded holes. Quick-release, disconnects in 3/10 of a second. Automatically releases when power is lost. 		$ 383.00
Illumination (lamp) delay timer GC 901 GC 901 Light delay timer
Allows connection of a light to the gate operator.
Will illuminate driveway for 60 seconds, then shuts off.		 $ 148.13
16 gauge outdoor cable for gate opener and accessories - EW 90 EW 90 16-Gauge outdoor cable
Used to run low voltage power to battery-operated gate operators. Can be buried directly in the ground without need for conduit. Two 16-gauge conductors with red and black insulation for easy wire identification. Heavy outer jacket resists moisture and chemicals.		 $ 1.00/ft
Programmable gate timer GC839  

GC 839-S12

GC 839 -S24

CG 839-S110

 7-Day timer
Used to automatically open or close a gate at pre-programmed times. Includes manual override and Battery Backup. May be used with all operators.12VDC.

Same as above but in 24VAC.

Same as above but in 110VAC.

 $ 194.00

 

$ 138.00

$ 138.00
Thermostat heater strip for electric gate opener - GC 902 GC 902 Thermostat control heater strip *
Keeps gate operators working in very low temperatures. Will automatically turn on below 30°F. 60 Watt heater output. Plugs into 115V outlet. Flexible, can wrap around gear boxes, motors etc.

 *Not available for battery or solar operator option units.

$ 239.00

 

.

Automatic Gate Openers, Parts and Accessories for:
Elite, LiftMaster, Chamberlain Professional Products and AGS Automatic Gate Supply.

Operator Depot (Formerly AGS)
25583 Avenue Stanford, Valencia, CA 91355
(800) 365-1047 (661) 294-1407 FAX (661) 294-1401